Workshop manual

Precautions/Procedures

Disconnecting the Airbag Connectors and Seat Belt Tensioner Connectors

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF pages 1285, 1286 (manual pages 24-22 to 24-23)

PDF p. 1285 · 24-22

Before removing the airbag or SRS related devices (the SRS unit, the cable reel and the seat belt tensioner connector), disconnecting connectors from related devices, or removing the dashboard or the steering column, disconnect the airbag connectors from the airbags to prevent accidental deployment.

A. Airbag connectors to be disconnectedB. SRS devices to be removed/SRS-related connectors to be
disconnected
Disconnect the D1, P1, TL and TR connectorsRemoval of the SRS unit
Disconnect the D1, P1, TL and TR connectorsDisconnection of the U1o connector
Disconnect the D1 connectorDisconnection of the D2 connector
Disconnect the D1 connectorRemoval of the cable reel
Illustration · Precautions/Procedures · Disconnecting the Airbag Connectors and Seat Belt Tensioner Connectors

PDF p. 1286 · 24-23

  1. 1.
    Disconnect the battery negative cable and wait at least three minutes.
  2. 2.
    Disconnect the airbag connector(s) and (or) seat belt tensioner(s) connector(s).

Driver’s Side:

  • Remove the access panel from the steering wheel, then disconnect the D1i connector and D1o connector.
Illustration: ACCESS PANEL; D1o CONNECTOR; D1i CONNECTOR
  1. 1. ACCESS PANEL
  2. 2. D1o CONNECTOR
  3. 3. D1i CONNECTOR
  • Remove the glove box (see section 20) then disconnect the P1i connector and P1o connector.
Illustration: P1i CONNECTOR; P1o CONNECTOR
  1. 1. P1i CONNECTOR
  2. 2. P1o CONNECTOR

Seat Belt Tensioner:

  • Remove the left and (or) right “B” pillar trim panel (see section 20).
  • Disconnect the TL1i connector from the TL1o connector (left side) and (or) TR1connector from the TR1o connector (right side).
Illustration: TL1o CONNECTOR or (TR1o CONNECTOR); TL1i CONNECTOR or (TR1i CONNECTOR)
  1. 1. TL1o CONNECTOR or (TR1o CONNECTOR)
  2. 2. TL1i CONNECTOR or (TR1i CONNECTOR)