PDF p. 2035 · 23-E-9
- 1.Remove the armrest pocket.
- 2.Disconnect the 14P connector from the power window master switch.
- 3.Check for continuity between the terminals in each switch position according to the tables.

- 1. POWER WINDOW MASTER SWITCH
Driver’s Switch:
The driver’s switch is combined with the control unit so you cannot isolate the switch to test it. Instead, run the master switch input test procedures.
If the tests are normal, the driver’s switch must be faulty.
Passenger’s Switch

[ ]: RHD type
- 4.Check that the switch light comes on when connecting the battery power to the No. 4 [3] terminal and ground to the No. 1 [6] terminal.
- If it does not come on, replace the master switch.