PDF p. 1203 · 23-E-9
- 1.Remove the armrest pocket (See Page 23-E-10).
- 2.Disconnect the 14P connector from the power window master switch.
- 3.Check for continuity between the terminals in each switch position according to the tables.

- 1. POWER WINDOW MASTER SWITCH
Driver’s Switch:
The driver’s switch is combined with the control unit so you cannot isolate the switch to test it. Instead run the master switch input test procedure (See Page 23-E-11). If the tests are normal, the driver’s switch must be faulty.
Passenger’s Switch
