Workshop manual

Power Relays

Power Relay Test

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 1120 (manual page 23-B-3)

PDF p. 1120 · 23-B-3

NOTE: For turn signal/hazard relay input test (See Page 23-D-22).

Normally open type A:

  1. 1.
    Check for continuity between the terminals.
    • There should be continuity between No. 1 and No. 2 terminals when power and ground are connected to the No. 3 and No. 4 terminals.
    • There should be no continuity between the No. 1 and No. 2 terminals when power is disconnected.
Illustration · Normally open type A
  • Headlight relay 1
  • Headlight relay 2
  • Radiator fan relay
  • Condenser fan relay
  • A/C compressor clutch relay
  • Horn relay
  • Power window relay
  • Taillight relay
  • Seat heater main relay (KG model)
  • Starter cut relay (LHD type: CVT)
  • Shift lock relay (KQ, KU models: CVT)

Type 1:

Illustration · Type 1

Type 2:

Illustration · Type 2

Normally open type B:

  1. 1.
    Check for continuity between the terminals.
    • There should be continuity between No. 1 and No. 3 terminals when power and ground are connected to the No. 2 and No. 4 terminals.
    • There should be no continuity between the No. 1 and No. 3 terminals when power is disconnected.
Illustration · Normally open type B
  • Blower motor relay
Illustration · Normally open type B