Workshop manual

A/C Compressor Belt

Adjustment

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 1090 (manual page 22-35)

PDF p. 1090 · 22-35

Deflection Method

  1. 1.

    Apply a force of 98 N (10 kgf, 22 lbf) and measure the deflection between the A/C compressor and the crankshaft pulley.

    A/C Compressor Belt

    Used Belt: 8.0 - 10.5 mm (0.31 - 0.41 in)

    New Belt: 5.0 - 7.0 mm (0.20 - 0.28 in)

    Note the following items when adjusting the belt tension:

    • If there are cracks or any damage evident on the belt replace it with a new one.
    • “Used belt” means a belt which has been used for five minutes or more.
    • “New belt” means a belt which has been used for less than five minutes.
  2. 2.
    Loosen the centre nut of the idler pulley.
  3. 3.
    Turn the adjusting bolt to get proper belt tension.
  4. 4.
    Retighten the centre nut of the idler pulley.
  5. 5.
    Recheck the deflection of the A/C compressor belt.
Illustration · Deflection Method

Tension Gauge Method

  1. 1.

    Attach the special tool to the A/C compressor belt as shown below and measure the tension of the belt.

    A/C Compressor Belt

    Used Belt: 340 - 490 N (35-50 kgf, 77-110 lbf) New Belt: 690 - 830 N (70-85 kgf, 150-190 lbf)

    Note the following items when adjusting the belt tension:

    • Follow the manufacturer’s instructions for the belt tension gauge.
    • If there are cracks or any damage evident on the belt replace it with a new one.
    • “Used belt” means a belt which has been used for five minutes or more.
    • “New belt” means a belt which has been used for less than five minutes.
  2. 2.
    Loosen the centre nut of the idler pulley.
  3. 3.
    Turn the adjusting bolt to get proper belt tension.
  4. 4.
    Retighten the centre nut of the idler pulley.
  5. 5.
    Recheck the deflection of the A/C compressor belt.
Illustration: BELT TENSION GAUGE, 07JGG-0010101
  1. 1. BELT TENSION GAUGE, 07JGG-0010101