PDF p. 1684 · 8-4
Paint Refinishing
Paint damage can appear in any form. Before making a repair, check the damaged area carefully, and determine the procedure best suited to the type. The following relates to paint refinishing methods for various types of paint damage or defects.
Defects and Refinishing Processes
- A.
Damage or defects that have gone through to the metal surface.
Rusting or deformation:
- 1.Featheredge the damaged area.
- 2.Prepare the metal surface.
- 3.Apply a chemical coating to the metal surface. Metal conditioner, precoat, A.C.P treatment.
- 4.Apply an undercoat (primer surfacer).
- 5.Apply an intermediate coat (colour matched to top enamel paint).
- 6.
Apply a top coat (body colour paint).
Solid colour: Enamel top coat paint.
Metallic colour: Metallic enamel paint + Clear top coat.
Pearl colour: Pearl enamel paint + Clear top coat.
- 1.
- B.
Damage or defects up to undercoat or intermediate coat.
For external damage or blisters, perform steps 4 through 6 under item A.
For external damage only perform steps 5 through 6 under item A.
- C.
Damage or defects that have not gone through to the intermediate coats (only in top coat)
Shallow scratches or score marks:
- (1)If damage has gone through to the metallic paint, spray metallic enamel, then apply top coat wet on wet.
- (2)If damage has not reached the metallic color paint and remained in the clear top coat, polish the damaged surface or spray the top clear coat only.
- (1)
NOTE: Try to repair by polishing as much as possible if the damage has not reached the metallic color paint.
- D.
Replacement of Parts
Welded parts
Rear side outer panel, etc.
- (1)Perform step 1 through 6 if the damaged area is covered with filler or welded with reinforcement plate.
- (2)Perform steps 5 and 6 for undercoats except those on joints (intermediate coat for replacement parts).
- (3)On inner panels, apply paint where the undercoat is burned by welding heat. Follow this with a rust preventative treatment (see section 7).
- (1)
Single parts
- Painting the outer and inner hood, door, trunk, lid etc. Perform steps 5 and 6 under item A.
- Painting the inside of the front fender. Only enamel top coat paint may be used on solid color enamel, metallic enamel or pearl enamel.
- After spraying enamel paint, perform rust preventative treatment (apply inner or outer rust preventative agent).