PDF p. 902 · 19-A-25
- 1.Inspect the brake hoses for damage, deterioration, leaks, interference and twisting.
- 2.Check the brake lines for damage, rusting and leakage. Also check for bent brake lines.
- 3.Check for leaks at hose and line joints or connections and retighten if necessary.
- 4.
Check the master cylinder, proportioning control valve and ABS modulator unit for damage and leakage.
NOTE:
- Replace the brake hose clip whenever the brake hose is serviced.
- LHD type is shown, RHD type is symmetrical.

- 1. ABS MODULATOR UNIT to BRAKE LINE, 15 Nm (1.5 kgf/m, 11 lbf/ft)
- 2. 4-WAY JOINT to BRAKE LINE, 15
Nm (1.5 kgf/m, 11 lbf/ft) - 3. MASTER CYLINDER to BRAKE LINE, 15 Nm (1.5 kgf/m, 11 lbf/ft)
- 4. BRAKE LINE to BRAKE HOSE, 15 Nm (1.5 kgf/m, 11 lbf/ft)
- 5. BRAKE LINE to WHEEL CYLINDER, 15 Nm (1.5 kgf/m, 11 lbf/ft), BLEED SCREW, 7 Nm (0.7 kgf/m, 5 lbf/ft)
- 6. BRAKE LINE to BRAKE HOSE, 15 Nm (1.5 kgf/m, 11 lbf/ft)
- 7. BRAKE HOSE to FRONT BRAKE CALIPER (BANJO BOLT), 34 Nm (3.5 kgf/m, 25 lbf/ft), BLEED SCREW, 9 Nm (0.9 kgf/m, 7 lbf/ft)
- 8. PROPORTIONING CONTROL VALVE to BRAKE LINE, 15 Nm (1.5 kgf/m, 11 lbf/ft)
- 9. Without ABS: