PDF p. 744 · 15-13
Most problems in the unit are to be diagnosed by identifying noises from the gears or bearings.
Care should be taken during diagnosis not to confuse differential noises with those from other drivetrain components.
| Symptom | Probable Cause | Remedy | ||
|---|---|---|---|---|
| Will not go into 4WD mode | ♦ | Fluid level too low | ♦ | Add fluid |
| ♦ | Incorrect fluid type | ♦ | Replace | |
| Will not return to 2WD mode | Incorrect fluid type | Drain and fill the differential | ||
| Gear or bearing noises | ♦ | Fluid level too low | ♦ | Add fluid |
| ♦ | Incorrect fluid type | ♦ | Drain and fill the differential | |
| ♦ | Damaged or chipped gears | ♦ | Replace the differential carrier | |
| assembly | ||||
| Overheating | ♦ | Fluid level too low | ♦ | Add fluid |
| ♦ Incorrect fluid type | ♦ | Drain and fill the differential | ||
| Fluid leak | ♦ | Fluid level too high | ♦ | Lower to proper level |
| ♦ | Clogged breather hose | ♦ | Clean or replace | |
| ♦ | Worn or damaged oil seal | ♦ | Replace | |
| ♦ | Damaged sealing washer | ♦ | Replace | |
| ♦ | Loose mounting bolts or inadequate | ♦ | Recheck torque or apply sealant | |
| sealing | ||||