Workshop manual

Flywheel Drive Plate

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 718 (manual page 14-161)

PDF p. 718 · 14-161

Illustration: DRIVE PLATE; WASHER Install in this direction.; FLYWHEEL Inspect the teeth of the ring gear for excessive wear.; 12 x 1.0 mm, 74 Nm (7.5 kgf/m, 54 lbf/ft) Torque in a criss-cross pattern.
  1. 1. DRIVE PLATE
  2. 2. WASHER Install in this direction.
  3. 3. FLYWHEEL Inspect the teeth of the ring gear for excessive wear.
  4. 4. 12 x 1.0 mm, 74 Nm (7.5 kgf/m, 54 lbf/ft) Torque in a criss-cross pattern.