PDF p. 549 · 13-75
- 22.Turn the select lever and shift arm shaft counterclockwise, then insert the shift arm shaft.
- 23.Align the shift arm A groove and select arm finger by turning the shift arm shaft and select lever clockwise, then install the shift arm shaft assembly.
- 24.Apply liquid gasket (P/N 08C70-K0234M) to the threads, install the interlock bolt.

- 1. SELECT LEVER
- 2. INTERLOCK BOLT, 39 Nm (4.0 kgf/m, 29 lbf/ft)
- 3. SELECT ARM
- 4. SHIFT ARM SHAFT
- 5. SHIFT ARM A
- 25.
Apply liquid gasket to the surface of the shift arm cover as shown.
NOTE:
- Use liquid gasket (P/N 08C70-K0234M).
- Remove the dirty oil from the sealing surface.
- Seal the entire circumference of the bolt holes to prevent oil leakage.
- If 20 minutes have passed after applying liquid gasket, reapply it and assemble the housings.
- Allow it to cure for at least 20 minutes after assembly before filling the transmission with oil.

- 1. ---- LIQUID GASKET
- 26.Install the shift arm cover assembly.

- 1. SHIFT ARM COVER ASSEMBLY
- 2. 8 x 1.25 mm, 27 Nm (2.8 kgf/m, 20 lbf/ft)
- 3. 10 x 12 mm DOWEL PIN
- 27.Install the transfer assembly or left side cover. 2WD Model:

- 1. 10 x 1.25 mm, 44 Nm (4.5 kgf/m, 33 lbf/ft)
- 2. O-RING, replace
- 3. LEFT SIDE COVER
4WD Model:

- 1. DOWEL PIN
- 2. O-RING, Replace
- 3. TRANSFER ASSEMBLY
- 4. 10 x 1.25 mm, 44 Nm (4.5 kgf/m, 33 lbf/ft)