Workshop manual

Clutch Disc

Removal/Inspection

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 469 (manual page 12-11)

PDF p. 469 · 12-11

  1. 1.
    Remove the clutch disc and special tools.
Illustration: CLUTCH DISC
  1. 1. CLUTCH DISC
  1. 2.
    Inspect the lining of the clutch disc for signs of slippage or oil. If the clutch disc is burned or black or oil soaked, replace it.
  2. 3.

    Measure the clutch disc thickness.

    Standard (New):8.4 - 9.0 mm (0.33 - 0.35 in)
    Service Limit:6.0 mm (0.24 in)
Illustration: CLUTCH DISC
  1. 1. CLUTCH DISC

If the thickness is less than the service limit, replace the clutch disc.

  1. 4.

    Measure the rivet depth from the lining surface to the rivets, on both sides.

    Standard (New): 1.65 - 2.25 mm

    (0.065 - 0.089 in)

    Service Limit: 0.2 mm (0.008 in)

Illustration: CLUTCH DISC; LINING SURFACE; RIVET
  1. 1. CLUTCH DISC
  2. 2. LINING SURFACE
  3. 3. RIVET

If the thickness is less than the service limit, replace the clutch disc.