Workshop manual

Slave Cylinder

Overhaul/Inspection

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 465 (manual page 12-8)

PDF p. 465 · 12-8

Illustration · Slave Cylinder · Overhaul/Inspection

: HONDA Genuine Urea Grease UM264 (P/N41211-PY5-305).

Illustration · Slave Cylinder · Overhaul/Inspection

: Brake Assembly Lube or equivalent rubber grease.

Illustration: GREASE (Brake Assembly Lube); SLAVE CYLINDER SPRING Install with small end facing piston; SLAVE CYLINDER BODY Check the cylinder wall for scoring and wear; BLEEDER SCREW 7.8 Nm (0.8 kgf/m, 5.8 lbf/ft); BLEEDER SCREW CAP; BOOT Check that it is fitted securely over the cylinder body; PUSH ROD; SLAVE CYLINDER PISTON Check for wear and damage; PISTON CUP A Replace; PISTON CUP B Replace; UREA GREASE UM264 (P/N 41211-PY5-305); GREASE (Brake Assembly Lube)
  1. 1. GREASE (Brake Assembly Lube)
  2. 2. SLAVE CYLINDER SPRING
    Install with small end facing piston
  3. 3. SLAVE CYLINDER BODY
    Check the cylinder wall for scoring and wear
  4. 4. BLEEDER SCREW
    7.8 Nm (0.8 kgf/m, 5.8 lbf/ft)
  5. 5. BLEEDER SCREW CAP
  6. 6. BOOT
    Check that it is fitted securely over the cylinder body
  7. 7. PUSH ROD
  8. 8. SLAVE CYLINDER PISTON
    Check for wear and damage
  9. 9. PISTON CUP A
    Replace
  10. 10. PISTON CUP B
    Replace
  11. 11. UREA GREASE UM264 (P/N 41211-PY5-305)
  12. 12. GREASE (Brake Assembly Lube)