Workshop manual

Emission Control System

Positive Crankcase Ventilation (PCV) System

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 435 (manual page 11-105)

PDF p. 435 · 11-105

Description

The Positive Crankcase Ventilation (PCV) system is designed to prevent blow-by gas from escaping to the atmosphere. The PCV valve contains a spring-loaded plunger. When the engine starts, the plunger in the PCV valve is lifted in proportion to intake manifold vacuum and the blow-by gas is drawn directly into the intake manifold.

Illustration: BREATHER PIPE; INTAKE MANIFOLD; PCV HOSE; PCV VALVE BLACK ARROR: BLOW-BY VAPOUR WHITE ARROR: FRESH AIR
  1. 1. BREATHER PIPE
  2. 2. INTAKE MANIFOLD
  3. 3. PCV HOSE
  4. 4. PCV VALVE
    BLACK ARROR: BLOW-BY VAPOUR WHITE ARROR: FRESH AIR

Inspection

  1. 1.
    Check the PCV hoses and connections for leaks and clogging.
Illustration: BREATHER HOSE; PCV HOSE; PCV VALVE
  1. 1. BREATHER HOSE
  2. 2. PCV HOSE
  3. 3. PCV VALVE
  1. 2.
    At idle, make sure there is a clicking sound from the PCV valve when the hose between PCV valve and intake manifold in lightly pinched with your fingers or pliers.
Illustration: Gently pinch here.
  1. 1. Gently pinch here.
  • If there is no clicking sound, check the PCV valve grommet for cracks or damage. If the grommet is OK, replace the PCV valve and recheck.