Workshop manual

Piston Pins

Inspection

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 288 (manual page 7-18)

PDF p. 288 · 7-18

  1. 1.

    Measure the diameter of the piston pin.

    Piston Pin Diameter:

    Standard (New):18.994 - 19.000 mm
    (0.7478 - 0.7480 in)
    Oversize:18.997 - 19.003 mm

    (0.7479 - 0.7481 in)

    NOTE: All replacement piston pins are oversize.

Illustration · Piston Pins · Inspection
  1. 2.
    Zero the dial indicator to the piston pin diameter.
Illustration · Piston Pins · Inspection
  1. 3.

    Measure the piston pin-to-piston clearance.

    NOTE: Check the piston for distortion or cracks. If the piston pin clearance is greater than 0.024 mm (0.0009 in), remeasure using an oversize piston pin.

    Piston Pin-to-Piston Clearance

    Standard (New): 0.010 - 0.022 mm

    (0.0004 - 0.0009 in)

Illustration · Piston Pins · Inspection
  1. 4.

    Check the difference between piston pin diameter and connecting rod small end diameter.

    Piston Pin-to-Connecting Rod Interference

    Standard (New): 0.014 - 0.040 mm

    (0.0006 - 0.0016 in)

Illustration · Piston Pins · Inspection