Workshop manual

Dash Lights Brightness Controller (KQ model)

Controller Test (4D)

Supplement 2000 (5-door model) · source: HRV_Workshop_Manual.pdf, PDF page 2023 (manual page 23-D-8)

PDF p. 2023 · 23-D-8

  1. 1.
    Carefully pry the switch out of the rear console.
  2. 2.
    Disconnect the 5P connector from the switch.
Illustration: DASH LIGHTS BRIGHTNESS CONTROLLER; 5P CONNECTOR; Not used
  1. 1. DASH LIGHTS BRIGHTNESS CONTROLLER
  2. 2. 5P CONNECTOR
  3. 3. Not used
  1. 3.

    Measure resistance between the No. 3 and No. 5 terminals.

    Resistance: 8,000 - 12,000 ohms

    NOTE: Resistance will vary slightly with temperature.

  2. 4.
    Measure resistance between the No. 4 and No. 5 terminals while rotating the adjusting dial. Resistance should vary from 0 to 10,000 ohms as the dial is rotated.