PDF p. 1253 · 23-F-33
- 1.Remove the front bumper (see section 20).
- 2.Remove the left front inner fender.
- 3.Disconnect the 2P connectors and washer hose from the washer motors.
- 4.Remove the three mounting bolts and washer reservoir.
- 5.Remove the washer nozzle and washer hoses.
- 6.
Install in the reverse order of removal.
NOTE:
- Take care not to pinch the hoses during installation.
- Install the clips firmly.
- After installing, adjust the aim of the water nozzles.

PDF p. 1254 · 23-F-34
