Workshop manual

Wipers/Washers

Wiper/Washer Switch Test

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 1246 (manual page 23-F-27)

PDF p. 1246 · 23-F-27

  1. 1.
    Remove the steering column covers (see section 17).
  2. 2.
    Disconnect the 14P connector from the wiper/washer switch, then remove the two screws and the switch.
  3. 3.
    Check for continuity between the terminals in each switch position according to the table.
    • If there is continuity, the switch is OK.
    • If there is no continuity, check for continuity between the switch harnesses.
      • If the switch harness is OK, replace the wiper/washer switch.
Illustration: 14P CONNECTOR; KG, KY, KE models; KN, KT, KQ, KU models; WIPER/WASHER SWITCH
  1. 1. 14P CONNECTOR
  2. 2. KG, KY, KE models
  3. 3. KN, KT, KQ, KU models
  4. 4. WIPER/WASHER SWITCH

Windshield Wiper/Washer Switch: Rear Window Wiper/Washer Switch:

Illustration · Wipers/Washers · Wiper/Washer Switch Test