PDF p. 1207 · 23-E-13
- 1.Remove the armrest pocket (see section 20).
- 2.Disconnect the 5P connector then remove the mounting screws from the switch.

- 1. PASSENGER’S WINDOW SWITCH
- 2. ARMREST POCKET
- 3.Check for continuity between the terminals in each switch position according to the table.

Passenger’s Window Motor Test
- 1.Remove the passenger’s door panel and disconnect all the connectors (see section 20).
- 2.Disconnect the 6P connector from the window motor.

- 1. Terminal side of male terminals
- 2. 6P CONNECTOR
- 3.Test the motor in each direction by connecting battery power and ground according to the table.

- 4.If the motor does not run or fails to run smoothly, replace it.