Workshop manual

Headlights Adjuster (KG and KE models)

Headlight Adjuster Switch Test

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 1179 (manual page 23-D-13)

PDF p. 1179 · 23-D-13

  1. 1.
    Remove the switch panel from the dashboard.
  2. 2.
    Disconnect the 5P connector from the switch.
  3. 3.
    Push the switch out from behind the switch panel.
Illustration: 5P CONNECTION; SWITCH PANEL; HEADLIGHT ADJUSTER SWITCH; Not used; Not used
  1. 1. 5P CONNECTION
  2. 2. SWITCH PANEL
  3. 3. HEADLIGHT ADJUSTER SWITCH
  4. 4. Not used
  5. 5. Not used
  1. 4.

    Measure the resistance between the No. 1 and No. 3 terminals and then measure the resistance between the No. 3 and No. 5 terminals at positions 0, 1, 2 and 3 by moving the knob.

    Between No. 1 and No. 3 terminals: Approx. 4.7 k ohms

    Between No. 3 and No. 5 terminals:

Knob position0123
Resistance
(Approx. k ohms)3.93.52.82.4
  1. 5.
    Replace the switch if the resistance is not within specifications.