PDF p. 1174 · 23-D-8
- 1.Open the tailgate.
- 2.Remove the two mounting bolts from the taillight assembly.
- 3.Carefully remove the tailight assembly from the body.

- 1. MOUNTING BOLTS
- 2. TAILLIGHT ASSEMBLY
REAR FOG LIGHT: 21W
TURN SIGNAL LIGHT: 21W
BACK-UP LIGHT: 21W
BRAKE LIGHT/TAILLIGHT:21/5W
TAILLIGHT: 5W
NOTE: After installing them, run water over the lights to make sure they do not leak.
License Plate Lights
Replacement
- 1.Remove the tailgate trim panel (see section 20).
- 2.Remove the bulb socket.

- 1. LENS
- 2. BULB SOCKET
- 3. 2P CONNECTOR
- 4. BULB (5W)
- 3.Disconnect the 2P connector from the bulb socket.
- 4.Push the lens out from the body.