Workshop manual

Seats

Rear Seat-back Recline Adjuster Replacement

Supplement 2000 (5-door model) · source: HRV_Workshop_Manual.pdf, PDF page 1984 (manual page 20-35)

PDF p. 1984 · 20-35

5D:

NOTE:

  • Take care not to tear the seams or damage the seat covers.
  • Put on gloves to protect your hands.
  1. 1.
    Remove the seat-back.
  2. 2.

    Remove the recline adjuster.

    -1Release the hook in the bottom of the seat-back, and unzip.
    -2Fold back the side edge of the seat-back cover and pad.
    -3Remove the screws, then remove the recline cover.
    -4Disconnect the recline rod from the recline adjuster. If necessary, remove the recline rod.
    1. -5.
      Remove the bolts, then remove the recline adjuster.

: Screw, Bolt locations

Illustration: SEAT-BACK FRAME; SEAT-BACK COVER; HOOK; ZIPPER; LOCK KNOB; LOCK COLLAR; RECLINE ROD; PAD; SEAT-BACK COVER; RECLINE COVER; RECLINE ADJUSTER; RECLINE ROD; HOOK
  1. 1. SEAT-BACK FRAME
  2. 2. SEAT-BACK COVER
  3. 3. HOOK
  4. 4. ZIPPER
  5. 5. LOCK KNOB
  6. 6. LOCK COLLAR
  7. 7. RECLINE ROD
  8. 8. PAD
  9. 9. SEAT-BACK COVER
  10. 10. RECLINE COVER
  11. 11. RECLINE ADJUSTER
  12. 12. RECLINE ROD
  13. 13. HOOK
  1. 3.
    Install in the reverse order of removal, and note these items:
    • To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook.
    • Make sure the recline rod is connected securely.