Workshop manual

Seats

Front Seat Cover Replacement)

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF pages 993, 994 (manual pages 20-57 to 20-58)

PDF p. 993 · 20-57

NOTE:

  • Take care not to tear the seams or damage the seat covers.
  • Wear glovers to protect your hands.

Seat Back cover:

  1. 1.
    Fold the seat-back forward.
  2. 2.
    Release the hook.
Illustration: SEAT-BACK COVER; HOOK; Forward
  1. 1. SEAT-BACK COVER
  2. 2. HOOK
  3. 3. Forward
  1. 3.
    Fold back the seat-back cover, then release all inside springs.
Illustration: INSIDE SPRING; Forward; SEAT-BACK COVER; INSIDE SPRINGS
  1. 1. INSIDE SPRING
  2. 2. Forward
  3. 3. SEAT-BACK COVER
  4. 4. INSIDE SPRINGS
  1. 4.
    Remove the headrest guide, then remove the seat-back cover from the pad.
Illustration: HEADREST GUIDE
  1. 1. HEADREST GUIDE
  1. 5.
    Install in the reverse order of removal and note the following items:
    • To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks and inside springs.
    • Make sure the seat heater connector is plugged in properly and the seat heater harness is routed properly (with seat heater).

PDF p. 994 · 20-58

Seat cushion cover:

  1. 1.
    Remove the front seat (See Page 20-54).
  2. 2.
    Remove the seat cushion (See Page 20-55).
  3. 3.
    Release the clips from under the seat cushion, then loosen the seat cushion cover.
Illustration: SEAT CUSHION COVER; CLIP
  1. 1. SEAT CUSHION COVER
  2. 2. CLIP
  1. 4.
    Pull back the edge of the seat cushion cover all the way around and release the clips, then remove the seat cushion cover.
Illustration: SEAT-BACK COVER; CLIP; WIRE (PAD SIDE)
  1. 1. SEAT-BACK COVER
  2. 2. CLIP
  3. 3. WIRE (PAD SIDE)
  1. 5.
    Install in the reverse order of removal and note the following items:
    • To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips, hooks and inside springs.
    • Replace the released clips with new ones using commercially available upholstery ring pliers.
Illustration: UPHOLSTERY RING PLIERS; NEW CLIP
  1. 1. UPHOLSTERY RING PLIERS
  2. 2. NEW CLIP