Workshop manual

Seats

Front Seat Removal and Installation

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 990 (manual page 20-54)

PDF p. 990 · 20-54

  1. 1.
    Remove the seat track end covers and remove the bolts securing the front seat. When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage. Take care not to scratch the body or tear the seat covers.

: Bolt locations

Illustration: SEAT TRACK END COVER; FRONT SEAT
  1. 1. SEAT TRACK END COVER
  2. 2. FRONT SEAT
  1. 2.
    Lift up the front seat, then disconnect the seat belt switch or seat heater connector.
Illustration: SEAT BELT SWITCH or SEAT HEATER CONNECTOR
  1. 1. SEAT BELT SWITCH or SEAT HEATER CONNECTOR
  1. 3.
    With the help of an assistant, carefully remove the front seat through the door opening.
  2. 4.
    Install in the reverse order of removal and make sure the seat belt switch or seat heater connector is plugged in properly.