Workshop manual

Interior Trim

Trim Removal and Installation

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF pages 977, 978, 979 (manual pages 20-41 to 20-43)

PDF p. 977 · 20-41

NOTE:

  • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  • Take care not to bend or scratch the trim and panels.
  • Wear gloves to protect your hands.

: Clip locations 1. REAR PILLAR TRIM

Illustration: HOOK; REAR SIDE SHELF; FRONT SEAT BELT UPPER ANCHOR BOLT, 7/16-20 UNF, 32 Nm (3.3 kgf/m, 24 lbf/ft); CENTRE PILLAR TRIM; DOOR TRIM; HOOKS; FRONT PILLAR TRIM; LEFT KICK PANEL; RIGHT KICK PANEL; B portions; A portions; SIDE TRIM; PIN; REAR SIDE TRIM PANEL; SLIT
  1. 2. HOOK
  2. 3. REAR SIDE SHELF
  3. 4. FRONT SEAT BELT UPPER
    ANCHOR BOLT, 7/16-20 UNF, 32 Nm (3.3 kgf/m, 24 lbf/ft)
  4. 5. CENTRE PILLAR TRIM
  5. 6. DOOR TRIM
  6. 7. HOOKS
  7. 8. FRONT PILLAR TRIM
  8. 9. LEFT KICK PANEL
  9. 10. RIGHT KICK PANEL
  10. 11. B portions
  11. 12. A portions
  12. 13. SIDE TRIM
  13. 14. PIN
  14. 15. REAR SIDE TRIM PANEL
  15. 16. SLIT

PDF p. 978 · 20-42

: Bolt, screw locations : Clip locations

Illustration: REAR CENTRE SHELF; A portion; B portion; SPARE TYRE LID; CARGO AREA LIGHT Remove the rear pillar trim. (See Page 20-41).; ET SCREW; REAR SHELF SUPPORT; SIDE TRIM (See Page 20-41).; DOOR TRIM; REAR SIDE TRIM PANEL Remove the rear seat cushion, rear seat-back and rear side shelf.; REAR SEAT BELT LOWER ANCHOR BOLT 7/16-20 UNF, 32 Nm (3.3 kgf/m, 24 lbf/ft); To body; CARGO FRAME; REAR FLOOR BUCKET; REAR TRIM PANEL; HOOK; HOOKS
  1. 1. REAR CENTRE SHELF
  2. 2. A portion
  3. 3. B portion
  4. 4. SPARE TYRE LID
  5. 5. CARGO AREA LIGHT
    Remove the rear pillar trim.
    (See Page 20-41).
  6. 6. ET SCREW
  7. 7. REAR SHELF SUPPORT
  8. 8. SIDE TRIM (See Page 20-41).
  9. 9. DOOR TRIM
  10. 10. REAR SIDE TRIM PANEL
    Remove the rear seat cushion, rear seat-back and rear side shelf.
  11. 11. REAR SEAT BELT LOWER ANCHOR BOLT 7/16-20 UNF, 32 Nm (3.3 kgf/m, 24 lbf/ft)
  12. 12. To body
  13. 13. CARGO FRAME
  14. 14. REAR FLOOR BUCKET
  15. 15. REAR TRIM PANEL
  16. 16. HOOK
  17. 17. HOOKS

PDF p. 979 · 20-43

: Clip locations 1. PULL POCKET

Illustration: TAILGATE TRIM; PIN
  1. 2. TAILGATE TRIM
  2. 3. PIN

Install in the reverse order of removal and note the following items:

  • Replace any damaged clips.
  • Before installing the anchor bolts, make sure there are no twists or kinks in the seat belts.