Workshop manual

Exterior Trim

Side Sill Panel Replacement

Supplement 2000 (5-door model) · source: HRV_Workshop_Manual.pdf, PDF page 1987 (manual page 20-38)

PDF p. 1987 · 20-38

5D:

NOTE: Take care not to scratch the body.

  1. 1.

    Remove the side sill panel.

    -1Pull the inner fender back as necessary, and remove the expansion clips.
    -2Slide the side sill panel forward and remove it. The side clips will stay in the body.
    -3Remove the side clips from the body.
    : Screw locations, 4 : Clip locations
Illustration · 5D
  1. 2.
    Replace any damaged clips.
  2. 3.
    Install the side clips on the side sill panel.
  1. 1.
    EXPANSION CLIP
  2. 2.
    SIDE CLIP
  3. 3.
    INNER FENDER
  4. 4.
    SIDE SILL PANEL
  5. 5.
    Forward
  6. 6.
    SIDE SILL PANEL
  7. 7.
    SIDE CLIP
  1. 4.
    Hold the panel up, and fit all the side clips into the holes in the body, then push on the panel until the clips snap into place.
  2. 5.
    Install all the expansion clips.
  3. 6.
    Reinstall the inner fender.