Workshop manual

Body Paint Repair - Soft Chipping Guard

Primer Coat Types of Soft Chipping Guard Primer (Reference)

Body Repair Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 1692 (manual page 8-12)

PDF p. 1692 · 8-12

TypeApplicationCompositionPhysical propertyDrying time
Dual liquidRoomPigment12%Colour:GreyRoom temperature:
synthetic resintemperatureCalcic pigment: 37%Viscosity:68°F (120°C)68°F (20°C), 3 days
Baked at 176°FEpoxy polioleNon volatile: 65% mini.Baked:
(80°C) for 40resin:15%Specific gravity:176°F (80°C), 40
minutesAdditive,68°F (20°C), 1:378minutes (to harden
Solvent:36%thoroughly)
100%
Dual liquidRoomPigment:40%Colour:GreyRoom temperature:
AcrylicresintemperatureAcrylic resin:37%Viscosity:68°F (120°C)68°F (20°C), a day
Urethane resinBaked at 176°FAdditive,4 - 6 PoiseuilleBaked:
(80°C) for 30Solvent:23%Non volatile: 65% mini.176°F (80°C), 30
minutes100%Specific gravity:minutes (to harden
68°F (20°C), 1.35thoroughly)

Repair Materials and Tools

Gun and brushes:Materials
♦Spray gun♦Use primers equivalent to the ones shown in Types of
NOTE: Any gun having a tip of more than 1.0 mmChipping Guard Primer (Reference).
(0.04 in.) in diameter may be used for spraying the♦Make sure to keep the thickness of the coat at 20 microns.
primer.Masking:
♦Viscosity measure♦Masking tape, paper, vinyl sheet and plate (veneer and
Iwata-type (IHS) cup, Ford cupsteel).
♦Beaker♦Masking plates are not necessary when spraying in a booth.
1-2 l (1.05-2, 10 US. qt, 0.9-2 Imp. qt) in capacity
♦Stirring stick
Tools:Protectors:
♦Air or double action sander♦Wear an approved respirator or dust mask, gloves, safety
♦Sandpaper (#240-#400)goggles and other protective clothing.
  • Rags.
Thinner and cleaner:
♦Use the thinner specified for the primer.
♦Any commercially available lacquer thinner may be
used to clean the gun.