Workshop manual

Inspection and Adjustment

Steering Linkage and Gearbox

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 810 (manual page 17-15)

PDF p. 810 · 17-15

NOTE: LHD type is shown, RHD type is symmetrical.

Illustration: TIE-ROD END BALL JOINT Inspect for faulty movement and damage.; STEERING COLUMN Inspect for loose column mounting bolts and nuts.; STEERING JOINTS Check for loose joint bolts.; TIE-ROD LOCKNUT Check for loose locknut.; BALL JOINT BOOT Inspect for damage and deterioration.; STEERING GEARBOX Inspect for loose mounting bolts. GEARBOX MOUNTING CUSHIONS Inspect for deterioration.; PINION SHAFT GROMMET Inspect for damage and deterioration.; BOOT Inspect for damage and deterioration.
  1. 1. TIE-ROD END BALL JOINT Inspect for faulty movement and damage.
  2. 2. STEERING COLUMN
    Inspect for loose column mounting bolts and nuts.
  3. 3. STEERING JOINTS
    Check for loose joint bolts.
  4. 4. TIE-ROD LOCKNUT
    Check for loose locknut.
  5. 5. BALL JOINT BOOT
    Inspect for damage and deterioration.
  6. 6. STEERING GEARBOX
    Inspect for loose mounting bolts. GEARBOX MOUNTING CUSHIONS Inspect for deterioration.
  7. 7. PINION SHAFT GROMMET Inspect for damage and deterioration.
  8. 8. BOOT
    Inspect for damage and deterioration.