PDF p. 477 · 13-4
- 1.Park the vehicle on level ground and turn the engine OFF.
- 2.Remove the oil filler plug and washer, check the condition of the fluid and make sure the fluid is at the proper level.

1 WASHER
- 2.Proper Level
- 3.FILLER PLUG, 44 Nm (4.5 kgf/m, 33 lbf/ft)
- 3.If the transmission fluid is dirty, remove the drain plug and drain the fluid.

- 1. FILLER PLUG, 44 Nm (4.5 kgf/m, 33 lbf/ft)
- 2. WASHER Replace
- 3. WASHER, Replace
- 4. DRAIN PLUG, 39 Nm (4.0 kgf/m, 29lbf/ft)
- 4.
Reinstall the drain plug with a new washer, and refill the transmission fluid to the proper level.
Oil Capacity
SEVM Model Manual Transmission
1.8 l (1.9 US qt, 1.6 Imp qt) at fluid change 2.0 l (2.1 US qt, 1.8 Imp qt) at overhaul
SEPM Model Manual Transmission
1.65 l (1.74 US qt, 1.45 Imp qt) at fluid change 2.1 l (2.2 US qt, 1.8 Imp qt) at overhaul
Always use Genuine Honda Manual Transmission Fluid (MTF). If it is not available, you may use an API service SG, SH or SJ grade motor oil with a viscosity of SAE 10 W-30 or 10 W-40 as a temporary replacement.
- 5.Reinstall the oil filler plug with a new washer.