Workshop manual

Radiator

Replacement

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 316 (manual page 10-4)

PDF p. 316 · 10-4

  1. 1.
    Drain the engine coolant.
  2. 2.
    Remove the upper and lower radiator hoses, and ATF cooler hoses.
  3. 3.
    Disconnect the fan motor connector.
  4. 4.
    Remove the radiator upper bracket, then pull up the radiator.
  1. 5.
    Remove the fan shroud assembly and other parts from the radiator.
  2. 6.
    Install the radiator in the reverse order of removal. make sure the upper and lower cushions are set securely.
  3. 7.
    Fill the radiator with engine coolant and bleed the air.
Illustration: RADIATOR CAP; 6 x 1.0 mm, 9.8 Nm (1.0 kgf/m, 7.2 lbf/ft); UPPER BRACKET AND CUSHION; RADIATOR; COOLANT RESERVOIR; 6 x 1.0 mm, 7 Nm (0.7 kgf/m, 5 lbf/ft); LOWER CUSHION; O-RING. Replace; DRAIN PLUG; ATF COOLER HOSES; LOWER RADIATOR HOSE; FAN MOTOR CONNECTOR; RADIATOR FAN SHROUD ASSEMBLY; 6 x 1.0 mm, 7 Nm (0.7 kgf/m, 5 lbf/ft)
  1. 1. RADIATOR CAP
  2. 2. 6 x 1.0 mm, 9.8 Nm (1.0 kgf/m, 7.2 lbf/ft)
  3. 3. UPPER BRACKET AND CUSHION
  4. 4. RADIATOR
  5. 5. COOLANT RESERVOIR
  6. 6. 6 x 1.0 mm, 7 Nm (0.7 kgf/m, 5 lbf/ft)
  7. 7. LOWER CUSHION
  8. 8. O-RING. Replace
  9. 9. DRAIN PLUG
  10. 10. ATF COOLER HOSES
  11. 11. LOWER RADIATOR HOSE
  12. 12. FAN MOTOR CONNECTOR
  13. 13. RADIATOR FAN SHROUD
    ASSEMBLY
  14. 14. 6 x 1.0 mm, 7 Nm (0.7 kgf/m, 5 lbf/ft)