Workshop manual

VTEC Solenoid Valve

Inspection

Supplement 2000 (5-door model) · source: HRV_Workshop_Manual.pdf, PDF page 1770 (manual page 6-8)

PDF p. 1770 · 6-8

  1. 1.
    Disconnect the 1P connector from the VTEC solenoid valve.
  2. 2.

    If the resistance is within the specifications, remove the VTEC solenoid valve assembly from the cylinder head and check the VTEC solenoid valve filter/ O-ring for clogging.

    If there is clogging, replace the engine oil filter and the engine oil.

Illustration: VTEC SOLENOID VALVE ASSEMBLY; VTEC SOLENOID VALVE FILTER/O-RING, Replace.; 6 x 1.0 mm 12 Nm (1.2 kgf/m, 8.7 lbf/ft)
  1. 1. VTEC SOLENOID VALVE ASSEMBLY
  2. 2. VTEC SOLENOID VALVE FILTER/O-RING, Replace.
  3. 3. 6 x 1.0 mm 12 Nm (1.2 kgf/m, 8.7 lbf/ft)
  1. 3.
    If the filter is not clogged, push the VTEC solenoid valve with your finger and check its movement. If the VTEC solenoid valve is normal, check the engine oil pressure.
Illustration: O-RING, Replace.; VTEC SOLENOID VALVE ASSEMBLY; 6 x 1.0 mm 12 Nm (1.2 kgf/m, 8.7 lbf/ft)
  1. 1. O-RING, Replace.
  2. 2. VTEC SOLENOID VALVE ASSEMBLY
  3. 3. 6 x 1.0 mm 12 Nm (1.2 kgf/m, 8.7 lbf/ft)