Workshop manual

Seat Belts

Child Seat Anchor Fitting (KQ model)

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF page 1274 (manual page 24-9)

PDF p. 1274 · 24-9

Attachment points are provided for a rear seat mounted child restraint system which uses a top tether. The attachment points are located on rear trim panel. When using a child seat with a top tether, install the child seat anchor fitting securely.

NOTE: Make sure the child seat anchor fitting is installed properly.

Illustration: ATTACHMENT POINTS; CHILD SEAT ANCHOR FITTING 5/16-18 UNF, 22 Nm (2.2 kgf/m, 16 lbf/ft)
  1. 1. ATTACHMENT POINTS
  2. 2. CHILD SEAT ANCHOR FITTING 5/16-18 UNF, 22 Nm (2.2 kgf/m, 16 lbf/ft)

NOTE:

  • Do not remove the toothed washer from the child seat anchor fitting. Use the child seat anchor fitting with the toothed washer attached to it.
  • When installing a child seat on the rear seat, follow the instructions of the manufacturer of the child seat.
  • Additional anchor fittings are available.