Workshop manual

Headlight Adjuster (KG and KE models)

Headlight Adjuster Switch Test (4D)

Supplement 2000 (5-door model) · source: HRV_Workshop_Manual.pdf, PDF page 2020 (manual page 23-D-5)

PDF p. 2020 · 23-D-5

  1. 1.
    Carefully pry the switch out of the rear console.
  2. 2.
    Disconnect the 5P connector from the switch.
Illustration: HEADLIGHT ADJUSTER SWITCH; 5P CONNECTOR; Not used
  1. 1. HEADLIGHT ADJUSTER SWITCH
  2. 2. 5P CONNECTOR
  3. 3. Not used
  1. 3.

    Measure the resistance between the No. 1 and No. 3 terminals, and then measure the resistance between the No. 3 and No. 5 terminals at positions 0, 1, 2, and 3 by moving the knob.

    Between No. 1 and No. 3 terminals: Approx. 4.7k ohms

    Between No. 3 and No. 5 terminals:

Knob position0123
Resistance
[Approx. (k ohms)]3.9 3.5 2.8 2.4
  1. 4.
    Replace the switch if the resistance is not within the specifications.