PDF p. 1162 · 23-C-10
- 1.Remove the instrument panel (see section 20).
- 2.Remove the screws from the gauge assembly and spread a protective cloth on the upper column cover.

- 1. CONNECTORS
- 2. GAUGE ASSEMBLY
- 3. CLOTH
- 3.Disconnect the connectors and remove the gauge assembly.
- 4.Install in reverse order of removal.
Vehicle Speed Sensor
Replacement
- 1.Disconnect the 3P connector from the vehicle speed sensor (VSS).

- 1. MOUNTING BOLT
- 2. 3P CONNECTOR
- 3. VEHICLE SPEED SENSOR (VSS)
- 2.Remove the mounting bolt and then remove the VSS.
- 3.Install in the reverse order of removal.