Workshop manual

Bumpers

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF pages 1000, 1001, 1002 (manual pages 20-64 to 20-66)

PDF p. 1000 · 20-64

Front Bumper Removal and Installation

NOTE:

  • An assistant is helpful when removing the front bumper.
  • Take care not to scratch the front grille, front bumper and body.
  • Wear gloves to protect your hands.

: Screw locations : Clip locations 1. HOOK

Illustration: SIDE CLIP; FRONT BUMPER UPPER BEAM; INNER FENDER; FRONT BUMPER
  1. 2. SIDE CLIP
  2. 3. FRONT BUMPER UPPER BEAM
  3. 4. INNER FENDER
  4. 5. FRONT BUMPER

PDF p. 1001 · 20-65

: Bolt locations 1. FRONT BUMPER UPPER BEAM

Illustration: FRONT BUMPER BEAM
  1. 2. FRONT BUMPER BEAM

Install in the reverse order of removal and note the following items:

  • After reinstalling the upper beam, adjust the aim of the headlights (see section 23).
  • Make sure the front bumper engages the clips and hooks of the upper beam.
  • Replace any damaged clips.

PDF p. 1002 · 20-66

Rear Bumper Removal and Installation

NOTE:

  • An assistant is helpful when removing the rear bumper.
  • Take care not to scratch the rear bumper and body.
  • Wear gloves to protect your hands.

: Bolt locations : Nut locations, 4 : Clip locations, 13 1. REAR BUMPER EXTENSION

Illustration: HOOK; SIDE SPACERS; To body; REAR UNDER COVER; REAR BUMPER
  1. 2. HOOK
  2. 3. SIDE SPACERS
  3. 4. To body
  4. 5. REAR UNDER COVER
  5. 6. REAR BUMPER

Install in the reverse order of removal and note the following items:

  • Make sure the front bumper engages the side spacers and the hooks on each side securely.
  • Replace any damaged clips.