PDF p. 1678 · 7-2
Corrosion starts immediately after the steel base contacts the atmosphere. The condition is aggravated by sea wind, road salt, rain, snow and industrial fallout. There are many ways to protect vehicles against corrosion. Primer surfaces and paints are applied by electrodeposition or spray to protect the body.
Anti-rust Agents and Spray Guns
Use the following anti-rust agents or equivalents when making a body repair.
| RUSTOP DEOX #100 WAXOYL or equivalent | To be applied to welded joints inside body panel. |
| NOX-RUST 409-20S SOLTON 1000S or equivalent | To be applied under floor and wheelhouse. |
Spray guns:
Use the correct gun for the agent being used.
- Use of a pressure type spray gun is recommended when work involves a considerable number of vehicles.

Protectors: Wear gloves, mask and suitable eye protection.
- Use light oil and a rag to clean up spilled anti-rust agents. Precautions:
- 1.FOR RUSTOP
- 2.FOR DEOX#100
- 3.FOR WAXOYL
- 4.FOR NOXRUST 409-20S/SOLTON 1000S
- 5.Flexible nozzle
- 6.Open nozzle
- 7.L-type nozzle
- 8.360° nozzle
- 9.Air gun
- 10.Siphon
- 11.V-type nozzle
- 1.
Before applying an anti-rust agent, thoroughly clean the areas to be coated with a steam cleaner, etc., and let the areas dry.
NOTE: Waxoyl may be applied to a wet surface.
- 2.Spray an anti-rust agent sufficiently until the excess amount oozes out when filling the doors, side sills etc. Wipe away the excess agent with a clean rag dampened with light oil.
- 3.Do not spray an anti-rust agent on the brake hoses, brake wheel cylinders, brake drums, exhaust muffler and its related parts, emission control devices in the engine department, ball joint covers, plastic fuel strainer, etc. Wipe up any spilled agent at once.
- 4.Heat an anti-rust agent to room temperature 97.7°F (36.5°C) by submerging the container in hot water when the outside temperature is below 50°F (10°C).
- 5.
Ventilate when spraying an anti-rust agent as it contains a small amount of organic solvent. Keep sparks, flames and cigarettes away.
Clean the spray gun after spraying with anti-rust agent