Workshop manual

Intake Air System

Throttle Body Inspection

Supplement 2000 (5-door model) · source: HRV_Workshop_Manual.pdf, PDF page 1890 (manual page 11-109)

PDF p. 1890 · 11-109

  1. 1.

    Check that the throttle cable operates smoothly without binding or sticking.

    If there are any abnormalities, check for:

    • Excessive wear or play in the throttle valve shaft.
    • Sticky or binding throttle lever at the fully closed position.
    • Clearance between throttle stop screw and throttle lever at the fully closed position.
Illustration: THROTTLE LEVER; THROTTLE STOP SCREW (Do not adjust.); There should be no clearance.
  1. 1. THROTTLE LEVER
  2. 2. THROTTLE STOP SCREW (Do not adjust.)
  3. 3. There should be no clearance.

Replace the throttle body if there is excessive play in the throttle valve shaft or if the shaft is binding or sticking.