PDF p. 2150 · 3-12
This Maintenance Schedule outlines the minimum required maintenance that you should perform to ensure the trouble-free operation of the customer’s vehicle. Due to regional and climatic differences, some additional servicing maybe required.
| Service at the | km x 1,000 | 20 | 40 | 60 | 80 | 100 | 120 | 140 | 160 | 180 | 200 | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| indicated distance or miles x 1,000 | 12 | 24 | 36 | 48 | 60 | 72 | 84 | 96 | 108 | 120 | NOTES | SECTION | |||
| time whichever | months | 12 | 24 | 36 | 48 | 60 | 72 | 84 | 96 | 108 | 120 | and PAGE | |||
| comes first | |||||||||||||||
| Replace engine oil | Every 5,000 km (3,000 miles) or 6 months | *2 8-5, 8-6 | |||||||||||||
| Replace engine oil filter | Every 5,000 km (3,000 miles) or 6 months | *2 8-6, 8-7 | |||||||||||||
| Clean or replace | Dry type | Clean every 10,000 km (6,000 miles) or 6 months and | *2 11-99 | ||||||||||||
| air cleaner element | replace every 20,000 km (12,000 miles) | ||||||||||||||
| or 12 months. | |||||||||||||||
| Wet type | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||
| Inspect valve | KN, KU models | ● | ● | ● | ● | ● | Check the valve clearance. | *2 6-3, 6-4 | |||||||
| clearance | |||||||||||||||
| KT, KY models | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||
| Replace fuel filter | ● | ● | ● | ● | ● | *2 11-86 | |||||||||
| Replace spark | KN, KU models | ● | ● | ● | ● | ● | *2 4-21, | ||||||||
| plugs | 4-22 | ||||||||||||||
| KT, KY models | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||
| Inspect distributor cap, rotor and | ● | ● | ● | ● | ● | *2 4-19 | |||||||||
| ignition wiring | |||||||||||||||
| Replace timing belt and inspect | ● | ● | Check water pump for signs of seal | *2 6-8, *2 | |||||||||||
| water pump | leakage. | 10-11 | |||||||||||||
| Inspect and adjust drive belts | ● | ● | ● | ● | ● | ♦ | Check for cracks and damage. | *2 4-39, *2 | |||||||
| ♦ | Check for deflection and tension. | 17-16, *2 | |||||||||||||
| 22-35 | |||||||||||||||
| Inspect idle speed and idle CO | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | *2 11-73 | ||||
| Replace engine coolant | 200,000 km (120,000 miles) or 120 months, thereafter | Check specific gravity for freezing point | 10-2 | ||||||||||||
| every 100,000 (60,000 miles) or 60 months | |||||||||||||||
| Inspect PCV valve | ● | ● | ● | ● | ● | Check the clicking sound of motion from | *2 11-105 | ||||||||
| the PCV valve of idling. | |||||||||||||||
| Inspect ignition timing | ● | ● | ● | ● | ● | *2 4-17 | |||||||||
| Inspect evaporative emission control | ● | ● | ♦ | Check the EVAPO control canister | *2 11-106 | ||||||||||
| system | operation. | ||||||||||||||
| ♦ | Check the hose for blockage, cracks or | ||||||||||||||
| disconnection. | |||||||||||||||
| Replace | MT | ● | ● | ● | ● | ● | Genuine Honda MTF | *2 13-4 | |||||||
| transmission fluid | |||||||||||||||
| CVT/Honda Multi | ● | ● | ● | ● | ● | ● | ● | ● | ● | Genuine Honda ATF - Z1 (ATF) | *2 14-84 | ||||
| Matic | |||||||||||||||
| Replace rear differential fluid | *1● | ● | ● | ● | Use only DPSF (Dual Pump System Fluid) | *2 15-14 | |||||||||
| Inspect front and rear brakes | Every 10,000 km (6,000 miles) or 6 months | ♦ | Check the brake pad and disc | *2 19-A-4, | |||||||||||
| thickness. | 19-A-9, | ||||||||||||||
| Check for damage or cracks. | 19-A-11, | ||||||||||||||
| ♦ | Check the calipers for damage, leaks | 19-A-12, | |||||||||||||
| and tightness. | 19-A-20, | ||||||||||||||
| ♦ | Check the wheel cylinder for leaks. | 19-A-21, | |||||||||||||
| ♦ | Check the brake linings for cracking, | 19-A-25 | |||||||||||||
glazing, wear or contamination.
- *1:Replace at 80,000 km (48,000 miles)/48 months, thereafter 40,000 km (24,000 miles)/24 months.
- *2:Refer to base shop manual on this CD.
PDF p. 2151 · 3-13
| Service at the | km x 1,000 | 20 | 40 | 60 | 80 | 100 | 120 | 140 | 160 | 180 | 200 | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| indicated distance or miles x 1,000 | 12 | 24 | 36 | 48 | 60 | 72 | 84 | 96 | 108 | 120 | NOTES | SECTION | ||
| time whichever | months | 12 | 24 | 36 | 48 | 60 | 72 | 84 | 96 | 108 | 120 | and PAGE | ||
| comes first. | ||||||||||||||
| Replace brake fluid (including ABS) | ● | ● | ● | ● | ● | Use only DOT3 or DOT4 fluid (We | *1 19-A-7 | |||||||
| recommend Genuine Honda Brake Fluid). | ||||||||||||||
| Check that brake fluid level is between the | ||||||||||||||
| upper and lower marks on the reservoir. | ||||||||||||||
| Check parking brake adjustment | ● | ● | ● | ● | ● | ● | Check the parking brake operation. | *1 19-A-6 | ||||||
| Rotate tyres | Rotate tyres every 10,000 km (6,000 miles) | The suggested rotation method is shown in | - | |||||||||||
| (Check tyre inflation and condition at | the diagram of the Owner’s Manual. | |||||||||||||
| least once per month) | ||||||||||||||
| Visually inspect the following items: | ♦ | Check for correct installation and | - | |||||||||||
| position, check for cracks, | ||||||||||||||
| deterioration, rust and leaks. | ||||||||||||||
| ♦ | Check tightness of screws, nuts and | |||||||||||||
| joints. | ||||||||||||||
| If necessary, retighten. | ||||||||||||||
| Tie rod ends, steering gearbox and | Every 10,000 km (6,000 miles) or 6 months | ♦ | Check rack grease and steering | *1 17-27, | ||||||||||
| boots | linkage. | 17-28 | ||||||||||||
| ♦ | Check the boot for damage and | |||||||||||||
| leaking grease. | ||||||||||||||
| ♦ | Check the fluid line for damage and | |||||||||||||
| leaks. | ||||||||||||||
| Suspension components | Every 10,000 km (6,000 miles) or 6 months | ♦ | Check the bolts for tightness. | *1 18-8, | ||||||||||
| ♦ | Check all the dust covers for | 18-9, | ||||||||||||
| deterioration and damage. | 18-18, | |||||||||||||
| 18-19 | ||||||||||||||
| Driveshaft boots | Every 10,000 km (6,000 miles) or 6 months | ♦ | Check boots and boot band for cracks. | *1 16-3 | ||||||||||
| ♦ | Check rack grease. | |||||||||||||
| Brake hoses and lines (including | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | Check master cylinder, proportioning | *1 19-A-4, | ||
| ABS) | control valve and ABS modulator for | 19-A-25 | ||||||||||||
| damage and leakage. | ||||||||||||||
| Cooling system hoses and | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ♦ | Check all hoses for damage, leaks or | *1 10-2 | |
| connection | deterioration. | |||||||||||||
| ♦ | Check all hose clamps. Retighten if | |||||||||||||
| necessary. | ||||||||||||||
| Exhaust system | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | Check the catalytic converter heat shield, | *1 9-4 | ||
| exhaust pipe and muffler for damage, | ||||||||||||||
| leaks and tightness. | ||||||||||||||
| Fuel lines and connections | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | Check fuel lines for loose connections, | *1 11-75 | ||
| cracks and deterioration. Retighten loose | ||||||||||||||
| connections and replace any damaged | ||||||||||||||
| parts. | ||||||||||||||
- *1:Refer to base shop manual on this CD.