Workshop manual

Maintenance Schedule

Australian Model - Normal Conditions

Supplement 2000 (5-door model) · source: HRV_Workshop_Manual.pdf, PDF pages 1757, 1758 (manual pages 3-8 to 3-9)

PDF p. 1757 · 3-8

Follow the Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule on pages 3-10 and 3-11 do not apply.

Service at thekm x 1,00020406080100120140160180200
indicated distance or miles x 1,0001224364860728496108120NOTESSECTION
time whichevermonths1224364860728496108120and PAGE
comes first.
Replace engine oilEvery 10,000 km (6,000 miles) or 12 months*2 8-5, 8-6
Replace engine oil filter●●●●●●●●●●*2 8-6, 8-7
Replace air cleaner element●●●●●*2 11-99
Inspect valve clearance●●●●●Check the valve clearance.*2 6-3, 6-4
Replace fuel filter●●●●●*2 11-86
Replace spark plugs●●●●●*2 4-21,
4-22
Replace timing belt and inspect●●Check water pump for signs of seal*2 6-8, *2
water pumpleakage.10-11
Inspect and adjust drive belts●●●●●♦Check for cracks and damage.*2 4-39, *2
♦Check deflection and tension.17-16, *2
22-35
Inspect idle speed●●*2 11-73
Replace engine coolant●●●●Check specific gravity for freezing point.*2 10-5,
10-6
Replace transmission fluid MTO●O●OHonda Genuine MTF*2 13-4
(O: Inspect)
Replace transmission fluid CVT●●●●●●●●●Genuine Honda ATF PREMIUM*2 14-84
(Automatic Transmission Fluid-PREMIUM)
Replace rear differential fluid*1●●Genuine Honda ATF PREMIUM*2 15-14
(Automatic Transmission Fluid-PREMIUM)
♦Check the brake pad and disc*2 19-A-4,
thickness.19-A-9,
Check for damage or cracks.,19-A-11,
Inspect front and rear brakes●●●●●●●●●●♦Check the calipers for damage, leaks19-A-12,
and tightness.19-A-20,
♦Check the wheel cylinder for leaks.19-A-21,
♦Check the brake linings for cracking,19-A-25
glazing, wear or contamination.
Replace brake fluid●●●Use only DOT3 or DOT4 fluid (We*2 19-A-7
recommend Genuine Honda Brake Fluid).
Check that brake fluid level is between the
upper and lower marks on the reservoir.
Check parking brake adjustment●●●●●●Check the parking brake operation.*2 19-A-6
Check lights alignment●●●●●●●●●●Check the position of the headlights.*2 23-D-7
Test drive (noise, stability,●●●●●●●●●●Check for road stability, noise, vibrations-
dashboard operations)and dashboard operation.
  • *1:
    Replace at 120,000 km (72,000 miles)/72 months, thereafter 60,000 km (36,000 miles)/36 months.
  • *2:
    Refer to shop manual: 99 HR-V MAINTENANCE, REPAIR and CONSTRUCTION Code No. 62S2H00.

PDF p. 1758 · 3-9

Service at thekm x 1,00020406080100120140160180200
indicated distance or miles x 1,0001224364860728496108120NOTESSECTION
time whichevermonths1224364860728496108120and PAGE
comes first
Visually inspect the following items:♦Check for correct installation and-
position, check for cracks,
deterioration, rust and leaks.
♦Check tightness of screws, nuts and
joints.
If necessary, retighten.
Tie rod ends, steering gearbox and●●●●●●●●●●♦Check rack grease and steering*1 17-27,
bootslinkage.17-28
♦Check the boot for damage and
leaking grease.
♦Check the fluid line for damage and
leaks.
Suspension components●●●●●●●●●●♦Check the bolts for tightness.*1 18-8,
♦Check all the dust covers for18-9,
deterioration and damage.18-18,
18-19
Driveshaft boots●●●●●●●●●●♦Check boots and boot band for cracks.*1 16-3
♦Check rack grease.
Brake hoses and lines (including●●●●●●●●●●Check the master cylinder, proportioning*1 19-A-4,
ABS)control valve and ABS modulator for19-A-25
damage and leakage.
Exhaust system●●●●●●●●●●Check the catalytic converter heat shield,*1 9-4
exhaust pipe and muffler for damage,
leaks and tightness.
Fuel lines and connections●●●●●●●●●●Check fuel lines for loose connections,*1 11-75
cracks and deterioration. Retighten loose
connections and replace any damaged
parts.
Tyre condition●●●●●●●●●●Check for pressure, puncture or cuts and-
irregular tread wear.
  • *1:
    Refer to shop manual: 99 HR-V MAINTENANCE, REPAIR and CONSTRUCTION Code No. 62S2H00.