Workshop manual

Maintenance Schedule

European Model - Normal Conditions

Supplement 2000 (5-door model) · source: HRV_Workshop_Manual.pdf, PDF pages 1753, 1754 (manual pages 3-4 to 3-5)

PDF p. 1753 · 3-4

Follow the Normal Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule on pages 3-6 and 3-7 do not apply.

Service at thekm x 1,000153045607590105120135150165
indicated distance or miles x 1,000918273645546372819099NOTESSECTION
time whichevermonths1224364860728496108120132and PAGE
comes first.
Replace engine oil and oil filter●●●●●●●●●●●*3 8-5 to 8-7
Replace air cleaner element●●●*3 11-99
Inspect valve clearance●●●Check the valve clearance*3 6-3, 6-4
Replace fuel filter●*3 11-86
Replace spark plugs●●●*3 4-21, *3
4-22
Replace timing belt and inspect●Check water pump for signs of seal*3 6-8, *3
water pumpleakage.10-11
Inspect and adjust drive belts●●●♦Check for cracks and damage.*3 4-39, *3
♦Check deflection and tension.17-16, *3
22-35
Inspect idle speed●*3 11-73
Replace engine coolant●●●Check specific gravity for freezing*3 10-5,
point.10-6
Replace transmission fluid
(O: Inspect)MTO*1●Genuine Honda MTF*3 13-4
CVT●●●Genuine Honda CVT Fluid*3 14-84
Replace rear differential fluid●*2Genuine Honda ATF PREMIUM*3 15-14
(Automatic Transmission
Fluid-PREMIUM)
Inspect front and rear brakes●●●●●●●●●●●♦Check the brake pad and disc*3 19-A-4,
thickness.19-A-9,
Check for damage or cracks.19-A-11,
♦Check the calipers for damage,19-A-12,
leaks and tightness.19-A-20,
♦Check the wheel cylinder for19-A-21,
leaks.19-A-25
♦Check the brake linings for
cracking, glazing, wear or
contamination.
Replace brake fluidEvery 3 yearsUse only DOT3 or DOT4 fluid (We*3 19-A-7
recommend Genuine Honda Brake
Fluid). Check that brake fluid level is
between the upper and lower marks
on the reservoir.
Check parking brake adjustment●●●●●●Check the parking brake operation.*3 19-A-6
Check lights alignment●●●●●●●●●●●Check the position of the headlights.*3 23-D-7
Test drive (noise, stability,●●●●●●●●●●●Check for road stability, noise,-
dashboard operation)vibrations and dashboard operation.
  • *1:
    Inspect at 45,000 km (27,000 miles)/36 months, and every 45,000 km (27,000 miles)/36 months after replacement.
  • *2:
    Replace at 120,000 km (72,000 miles)/96 months, thereafter 60,000 km (36,000 miles)/48 months.
  • *3:
    Refer to shop manual: 99 HR-V MAINTENANCE, REPAIR and CONSTRUCTION Code No. 62S2H00.

PDF p. 1754 · 3-5

Service at thekm x 1,000153045607590105120135150165
indicated distance or miles x 1,000918273645546372819099NOTESSECTION
time whichevermonths1224364860728496108120132and PAGE
comes first
Visually inspect the following items:♦Check for correct installation and-
position, check for cracks,
deterioration, rust and leaks.
♦Check tightness of screws, nuts,
and joints. If necessary,
retighten.
Tie rod ends, steering gearbox, and●●●●●●●●●●●♦Check rack grease and steering*1 17-27,
bootslinkage.17-28
♦Check the boot for damage and
leaking grease.
♦Check the fluid line for damage
and leaks.
Suspension components●●●●●●●●●●●♦Check the bolts for tightness.*1 18-8,
♦Check all the dust covers for18-9,
deterioration and damage.18-18,
18-19
Driveshaft boots●●●●●●●●●●●♦Check boots and boot band for*1 16-3
cracks.
♦Check rack grease.
Brake hoses and lines (including●●●●●●●●●●●Check the master cylinder,*1 19-A-4,
ABS)proportioning control valve and ABS19-A-25
modulator for damage and leakage.
Exhaust system●●●●●●●●●●●Check the catalytic converter heat*1 9-4
shield, exhaust pipe and muffler for
damage, leaks and tightness.
Fuel lines and connections●●●●●●●●●●●Check fuel lines for loose*1 11-75
connections, cracks and
deterioration. Retighten loose
connections and replace any
damaged parts.
Tyre condition●●●●●●●●●●●Check for pressure, puncture or cuts-
and irregular tread wear