Workshop manual

Maintenance Schedule

KN, KT, KU, KY Models

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF pages 183, 184 (manual pages 3-12 to 3-13)

PDF p. 183 · 3-12

This Maintenance Schedule outlines the minimum required maintenance that you should perform to ensure the trouble-free operations of the customer’s vehicle. Due to regional and climatic differences, some additional servicing maybe required.

Please consult the warranty handbook for a more detailed description.

Service at thekm x 1,00020406080100120140160180200NOTESSECTION
indicated distance or miles x 1,0001224364860728496108120and PAGE
time whichevermonths1224364860728496108120
comes first
Replace engine oilEvery 5,000 km (3,000 miles) or 6 months8-5
Replace engine oil filterEvery 5,000 km (3,000 miles) or 6 months8-5
Clean or replace airDry TypeClean every 10,000 km (6,000 miles) or 6 months and11-99
cleaner elementreplace every 20,000 km (12,000 miles) or 12 months
Wet Type♦♦♦♦♦♦♦♦♦♦
Inspect valveKN, KU models♦♦♦♦♦Check the valve clearance6-3
clearance
KT, KY models♦♦♦♦♦♦♦♦♦♦
Replace fuel filter♦♦♦♦♦11-86
Replace spark plugsKN, KU models♦♦♦♦♦4-21
KY, KY models♦♦♦♦♦♦♦♦♦♦
Inspect distributor cap, rotor and♦♦♦♦♦4-19
ignition wiring
Replace timing belt and inspect♦♦Check water pump for signs of seal6-8, 10-11
water pumpleakage
Inspect and adjust drive belts♦♦♦♦♦Check for cracks and damage.4-39,
Check for deflection and tension17-16,
22-35
Inspect idle speed and idle C0♦♦♦♦♦♦♦♦♦♦11-73
Replace engine coolant♦♦Check specific gravity for freezing point10-5
Inspect PCV valve♦♦♦♦♦Check the clicking sound of motion from11-105
the PCV valve of idling
Inspect ignition timing♦♦♦♦♦4-16
Inspect evaporative emission control♦♦Check the EVAPO control canister11-106
systemoperation.
Check the hose for blockage, cracks or
disconnected.
ReplaceMT♦♦♦♦♦Genuine Honda MTF13-4
transmission fluid
CVT/Honda♦♦♦♦♦♦♦♦♦Genuine Honda ATF PREMIUM14-84
Multi Matic(Automatic Transmission Fluid-PREMIUM)
Replace rear differential fluid♦*1♦♦♦Genuine Honda ATF PREMIUM15-14
(Automatic Transmission Fluid-PREMIUM)
Inspect front and rear brakesEvery 10,000 km (6,000 miles) or 6 monthsCheck the brake pad and disc thickness.19-A-4,
Check for damage or cracks.19-A-9,
Check the calipers for damage, leaks and19-A-11,
tightness.19-A-12,
Check the wheel cylinder for leaks.19-A-20,
Check the brake linings for cracking,19-A-21,
glazing, wear or contamination.19-A-25
  • *1:
    Replace at 80,000 km (48,000 miles)/48 months thereafter 40,000 km (24,000 miles)/24 months

PDF p. 184 · 3-13

Service at thekm x 1,00020406080100120140160180200NOTESSECTION
indicated distance or miles x 1,0001224364860728496108120and PAGE
time whichevermonths1224364860728496108120
comes first
Replace brake fluid (including ABS)♦♦♦♦♦Use only DOT3 or DOT4 fluid (We19-A-7
recommend Genuine Honda Brake Fluid).
Check that brake fluid level is between the
upper and lower marks on the reservoir.
Check parking brake adjustment♦♦♦♦♦♦Check the parking brake operation19-A-6
Rotate tyresRotate tyres every 10,000 km (6,000 miles)The suggested rotation method is shown in-
(Check tyre inflation and condition atthe diagram of the Owner’s Manual
least once per month)
Visually inspect the following items.Check for correct installation and position.-
Check for cracks, deterioration, rust and
leaks.
Check tightness of screws, nuts and joints.
If necessary, retighten.
Tie rod ends, steering gearbox andEvery 10,000 km (6,000 miles) or 6 monthsCheck rack grease and steering linkage.17-27,
bootsCheck the boot for damage and leaking17-28
grease.
Check the fluid line for damage and leaks.
Suspension componentsEvery 10,000 km (6,000 miles) or 6 monthsCheck the bolts for tightness.18-8, 18-9,
Check all the dust covers for deterioration18-18,
and damage.18-19
Driveshaft bootsEvery 10,000 km (6,000 miles) or 6 monthsCheck boots and boot band for cracks.16-3
Check rack grease.
Brake hoses and lines (including♦♦♦♦♦♦♦♦♦♦Check master cylinder, proportioning19-A-4,
ABS)control valve and ABS modulator for19-A-25
damage and leakage.
Cooling system hoses and♦♦♦♦♦♦♦♦♦♦Check all hoses for damage, leaks or10-2
connectiondeterioration.
Check all hose clamps. Retighten if
necessary.
Exhaust system♦♦♦♦♦♦♦♦♦♦Check the catalytic converter heat shield,9-4
exhaust pipe and muffler for damage,
leaks and tightness.
Fuel lines and connections♦♦♦♦♦♦♦♦♦♦Check fuel lines for loose connections,11-75
cracks and deterioration. Retighten loose
connections and replace any damaged
parts.