Workshop manual

Maintenance Schedule

Australian Model - Normal Conditions

Shop Manual 1999 · source: HRV_Workshop_Manual.pdf, PDF pages 179, 180 (manual pages 3-8 to 3-9)

PDF p. 179 · 3-8

Follow the maintenance schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule on pages 3-10 and 3-11 do not apply.

Service at thekm x 1,00020406080100120140160180200NOTESSECTION
indicated distance or miles x 1,0001224364860728496108120and PAGE
time whichevermonths1224364860728496108120
comes first
Replace engine oilEvery 10,000 km (6,000 miles) or 12 months8-5
Replace engine oil filter♦♦♦♦♦♦♦♦♦♦8-6
Replace air cleaner element♦♦♦♦♦11-99
Inspect valve clearance♦♦♦♦♦Check the valve clearance6-3
Replace fuel filter♦♦♦♦♦11-86
Replace spark plugs♦♦♦♦♦4-21
Replace timing belt and inspect♦Check water pump for signs of seal6-8, 10-11
water pumpleakage
Inspect and adjust drive belts♦♦♦♦♦Check for cracks and damage.4-39,
Check for deflection and tension.17-16,
22-35
Inspect idle speed♦11-73
Replace engine coolant♦♦♦♦Check specific gravity for freezing point10-5
Replace transmission fluid MTX♦X♦XHonda Genuine MTF13-4
(X: Inspect)
Replace transmission fluid CVT♦♦♦♦♦♦♦♦♦Genuine Honda ATF PREMIUM14-18
(Automatic Transmission Fluid-PREMIUM
Replace rear differential fluid♦*1♦Genuine Honda ATF PREMIUM15-14
(Automatic Transmission Fluid-PREMIUM
Check the brake pad and disc thickness.19-A-4
Check for damage or cracks.19-A-9
Inspect front and rear brakes♦♦♦♦♦♦♦♦♦♦Check the calipers for damage, leaks and19-A-11,
tightness.19-A-12
Check the wheel cylinder for leaks.19-A-20
Check the brake linings for cracking,19-A-21,
glazing, wear or contamination.19-A-25
Replace brake fluid♦♦♦Use only DOT3 or DOT4 fluid (We19-A-7
recommend Genuine Honda Brake Fluid).
Check that brake fluid level is between the
upper and lower marks on the reservoir.
Check parking brake adjustment♦♦♦♦♦♦Check the parking brake operation19-A-6
Check lights alignment♦♦♦♦♦♦♦♦♦♦Check the position of the headlights23-D-7
Test drive (noise, stability,♦♦♦♦♦♦♦♦♦♦Check for road stability, noise, vibrations-
dashboard operations)and dashboard operation
  • *1:
    Replace at 120,000 km (72,000 miles)/72 months, thereafter 60,000 km (36,000 miles)/36 months

PDF p. 180 · 3-9

Service at thekm x 1,00020406080100120140160180200NOTESSECTION
indicated distance or miles x 1,0001224364860728496108120and PAGE
time whichevermonths1224364860728496108120
comes first
Visually inspect the following items:Check for correct installation and position.-
Check for cracks, deterioration, rust and
leaks.
Check tightness of screws, nuts and joints.
If necessary, retighten.
Tie rod ends, steering gearbox and♦♦♦♦♦♦♦♦♦♦Check rack grease and steering linkage.17-27,
bootsCheck the boot for damage and leaking17-28
grease.
Check the fluid line for damage and leaks.
Suspension components♦♦♦♦♦♦♦♦♦♦Check the bolts for tightness.18-8, 18-9,
Check all the dust covers for deterioration18-18,
and damage.18-19
Driveshaft boots♦♦♦♦♦♦♦♦♦♦Check boots and boot band for cracks.16-3
Check rack grease.
Brake hoses and lines (including♦♦♦♦♦♦♦♦♦♦Check master cylinder, proportioning19-A-4,
ABS)control valve and ABS modulator for19-A-25
damage and leakage.
Exhaust system♦♦♦♦♦♦♦♦♦♦Check the catalytic converter heat shield,9-4
exhaust pipe and muffler for damage,
leaks and tightness.
Fuel lines and connections♦♦♦♦♦♦♦♦♦♦Check fuel lines for loose connections,11-75
cracks and deterioration. Retighten loose
connections and replace any damaged
parts.
Tyre condition♦♦♦♦♦♦♦♦♦♦Check for pressure, puncture or cuts and
irregular tread wear.