PDF p. 141 · 1-9
If the vehicle needs to be towed, call a professional towing service. Never tow the vehicle behind another vehicle with just a rope or chain. It is very dangerous.
Emergency Towing
There are three popular methods of towing a vehicle.
Flat-bed Equipment
The operator loads the vehicle on the back of a truck. This is the best way of transporting the vehicle.
Wheel Lift Equipment
The tow truck uses two pivoting arms that go under the tyres (front or rear) and lifts them off the ground. The other two wheels remain on the ground.
Sling-type Equipment
The tow truck uses metal cables with hooks on the ends. These hooks go around parts of the frame or suspension and the cables lift that end of the vehicle off the ground. The vehicle’s suspension and body can be seriously damaged if this method of towing is attempted.
If the 2WD HR-V cannot be transported by the flat-bed, it should be towed with the front wheels off the ground. If due to damage, the vehicle must be towed with the front wheels on the ground, do the following.
- Release the parking brake.
- Shift the transmission to Neutral N position.
The only recommended way of towing the 4WD HR-V is on a flat-bed truck. It may also be towed with all four wheels on the ground.
If the 4WD HR-V is towed with all four wheels on the ground, do the following:
- Release the parking brake.
- Shift the transmission to Neutral N position.
Towing Hook and Tie Down Bracket Locations:
Towing Hook:
- Remove the cover from the front bumper.
Install the front towing hook securely into the bolt hole.
The front towing hook is located in the tool kit in the luggage area.

- 1. FRONT TOWING HOOK
- 2. BOLT HOLE
- 3. FRONT BUMPER
- 4. COVER
Front Tie Down Bracket Hole:

- 1. FRONT TIE DOWN BRACKET HOLE
Rear Tie Down Bracket:

- 1. REAR TIE DOWN BRACKET